|
|
SMS Server Tools 3 Community |
Welcome, Guest. The forum is currently read-only, but will open soon. |
Fri Feb 14, 2025 17:42 |
This topic is locked
Page: 1
Author |
Post |
|
#1 Tue Jan 11, 2011 15:27, 171 months ago.
|
Member
Registered: Oct 2009
Location: Italy
|
Operating system name and version: CentOS 5.5 64bit Version of smsd: 3.1.14 Smsd installed from: sources Name and model of a modem / phone: Siemens MC35i Interface: serial Hello, I'm having the following issue with the Siemens MC35i: Seems it freezes... ?! this is my config: I've added "init", "init2" and memory_mode (31) only today. Until some weeks ago the device was ok. It's possible something on system is changed. Is there a way to troubleshoot manually the modem or maybe something wrong? Thank's Simon
|
|
#2 Tue Jan 11, 2011 17:45, 171 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
Serial port can be opened, but the modem does not answer. Check the serial cable, and that it is connected to the correct connector in the server.
|
|
#3 Wed Jan 12, 2011 07:01, 171 months ago.
|
Member
Registered: Jan 2011
Location: Dresden, Germany
|
Hi. We use a multimodem mtcba over ethernet with Device Option @192.168.2.1:5000 The Same Error.
When we use interceptty As Device /dev/Serial-Server all is ok. Do we Need some extra AT commands?
Best regards
Tobi
|
|
#4 Wed Jan 12, 2011 07:55, 171 months ago.
|
Member
Registered: Oct 2009
Location: Italy
Topic owner
|
keke wrote Serial port can be opened, but the modem does not answer. Check the serial cable, and that it is connected to the correct connector in the server.
I'll check it better. I suppose there is a conflict problem with activation of embedded management interface to redirect console over lan, but have to investigate better. In case of new errors I'll post it here, thank's! Simon
|
|
#5 Wed Jan 12, 2011 08:16, 171 months ago.
|
Member
Registered: Jan 2011
Location: Dresden, Germany
|
this is our config file and log (with net device settings) log with interceptty setting i can not remove the sim out of our old modem becouse the new modem did not funktion. I have to set something there? « Last edit by tobidd on Wed Jan 12, 2011 08:19, 171 months ago. »
|
|
#6 Wed Jan 12, 2011 08:46, 171 months ago.
|
Member
Registered: Jan 2011
Location: Dresden, Germany
|
OK all is working verry well now.
The Problem was that ppp was enabled in the webconfiguration of the multimodem. Disable ppp under the ppp General Settings and all is working. (dont forget to save&restart the Modem)
best regards Tobi
|
This topic is locked
Page: 1
Time in this board is UTC.
|
|
|
 |
|
 |
|