Operating system name and version: Fedora Core 9
Version of smsd: 3.1.14
Smsd installed from: sources
Name and model of a modem / phone: GSM MODEM Q2303A Based on WAVECOM Module
Interface: serial

Hi.
I have the problem same as who posted on "http://smstools3.kekekasvi.com/topic.php?id=481".
My specification on modem are below:

2011-02-12 18:52:11,2, smsd: Smsd v3.1.14 started. 2011-02-12 18:52:11,2, smsd: Running as root:root. 2011-02-12 18:52:11,4, smsd: File mode creation mask: 022 (0644, rw-r--r--). 2011-02-12 18:52:11,5, GSM1: Modem handler 0 has started. PID: 9407. 2011-02-12 18:52:11,5, GSM1: Using check_memory_method 1: CPMS is used. 2011-02-12 18:52:11,5, smsd: Outgoing file checker has started. PID: 9406. 2011-02-12 18:52:15,5, GSM1: CGSN: 359094025076282 2011-02-12 18:52:15,5, GSM1: IMSI: 432352300830377 2011-02-12 18:52:16,7, GSM1: ## Start of device details 2011-02-12 18:52:16,7, GSM1: # Manufacturer identification: 2011-02-12 18:52:16,7, GSM1: -> AT+CGMI 2011-02-12 18:52:16,7, GSM1: <- +CGMI: MTK1 OK 2011-02-12 18:52:16,7, GSM1: # Model identification: 2011-02-12 18:52:16,7, GSM1: -> AT+CGMM 2011-02-12 18:52:17,7, GSM1: <- +CGMM: MTK2 OK 2011-02-12 18:52:17,7, GSM1: # Revision identification: 2011-02-12 18:52:17,7, GSM1: -> AT+CGMR 2011-02-12 18:52:17,7, GSM1: <- +CGMR: MAUI.07B.W08.12, 2009/03/30 17:56 OK 2011-02-12 18:52:17,7, GSM1: # New message indications, list of supported modes: 2011-02-12 18:52:17,7, GSM1: -> AT+CNMI=? 2011-02-12 18:52:18,7, GSM1: <- +CNMI: (0-3), (0-3), (0,2,3), (0,1), (0,1) OK 2011-02-12 18:52:18,7, GSM1: # New message indications, current settings: 2011-02-12 18:52:18,7, GSM1: -> AT+CNMI? 2011-02-12 18:52:18,7, GSM1: <- +CNMI: 0, 0, 0, 0, 0 OK 2011-02-12 18:52:18,7, GSM1: # Preferred message storage, list of supported mem's: 2011-02-12 18:52:18,7, GSM1: -> AT+CPMS=? 2011-02-12 18:52:19,7, GSM1: <- +CPMS: ("SM", "ME", "SM_P", "ME_P", "MT"), ("SM", "ME", "SM_P", "ME_P", "MT"), ("SM", "ME", "SM_P", "ME_P", "MT") OK 2011-02-12 18:52:19,7, GSM1: # Phonebook storage, available mem's: 2011-02-12 18:52:19,7, GSM1: -> AT+CPBS=? 2011-02-12 18:52:19,7, GSM1: <- +CPBS: ("ME", "SM", "LD", "MC", "RC","FD") OK 2011-02-12 18:52:19,7, GSM1: # List messages, list of supported stat's: 2011-02-12 18:52:19,7, GSM1: -> AT+CMGL=? 2011-02-12 18:52:20,7, GSM1: <- +CMGL: (0-4) OK 2011-02-12 18:52:20,7, GSM1: # Delete message, list of supported values: 2011-02-12 18:52:20,7, GSM1: -> AT+CMGD=? 2011-02-12 18:52:20,7, GSM1: <- +CMGD: (1-15), (0-4) OK 2011-02-12 18:52:20,7, GSM1: # Phone activity status, list of supported stat's: 2011-02-12 18:52:20,7, GSM1: -> AT+CPAS=? 2011-02-12 18:52:21,7, GSM1: <- +CPAS: (0-5) OK 2011-02-12 18:52:21,7, GSM1: # TE character set, list of supported charset's: 2011-02-12 18:52:21,7, GSM1: -> AT+CSCS=? 2011-02-12 18:52:21,7, GSM1: <- +CSCS: "IRA", "GSM", "HEX", "PCCP437", "8859-1", "UCS2", "UCS2_0X81" OK 2011-02-12 18:52:21,7, GSM1: # TE character set, current setting: 2011-02-12 18:52:21,7, GSM1: -> AT+CSCS? 2011-02-12 18:52:22,7, GSM1: <- +CSCS: "GSM" OK 2011-02-12 18:52:22,7, GSM1: ## End of device details 2011-02-12 18:53:18,3, GSM1: Unexpected input: +CREG: 1, "9E4D", "6F78"

The command you posted for that person which solved his problem does not accepted on my modem. What is my modem configuration for delivery reports,
And here is a PDU of a sent message.

Hidden private text.

And an extra question: What application you use for this forum. it is very nice and good. Thanks for your application.

miladamirzadeh wrote

What is my modem configuration for delivery reports,

I did not find manual of AT Commands for this exact module. The module differs from general modules from Wavecom, there is no SR memory available. Perhaps reports are stored to somewhere else, but I do not know where.

If the setting init = AT+CNMI=1,0,0,2,0 did not give reports, you could try to use routed reports with a setting init = AT+CNMI=1,0,0,1,0. If this works, a modem setting using_routed_status_report = yes is required to avoid error messages in the log.

miladamirzadeh wrote

And an extra question: What application you use for this forum. it is very nice and good.

The forum engine is based on UseBB 1 Forum Software. I have used the version 1.0.9, but there is 1.0.11 currently available.

Hi.
Thank you for your response. I found a complete paper about my GSM Modem inside the software package.

Hidden private text.

I work for a company and I want that for them. Today, I could not test the plan you said.
And another question! Do you develop this software alone?

Thanks for your responses.

miladamirzadeh wrote

I found a complete paper about my GSM Modem inside the software package.

Thanks. Anyways, it's not of your modem, it's general "Wavecom" document from ten years ago. In this document listing of CPMS is different, and talks about "SR" memory which your device does not have.

Listing of CNMI may be appropriate, so you can check and try values based on that document. Try those settings I have listed, or change the first "1" to "2" (which is the only supported value).

miladamirzadeh wrote

And another question! Do you develop this software alone?

Currently yes, but sometimes some users may suggest changes or additions. Why do you ask, is it important for your company?

Hi, thanks. I test them.
My company is a young one. We try to be better. Before we find "smstools" we used a solution in VisualBasic.NET atsms library. We are trying to implement a complete SMS Server

Hidden private text.

. The question was not from my company (although they know you and tools), the question was from me who is a young non-experienced programmer.
I will tell you our project results.
Thank you very much.