#
# /etc/smsd.conf
#
# Description: Main configuration file for the smsd
#

devices = GSM1
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
incoming = /var/spool/sms/incoming
logfile = /var/log/smstools/smsd.log
infofile = /var/run/smstools/smsd.working
pidfile = /var/run/smstools/smsd.pid
outgoing = /var/spool/sms/outgoing
checked = /var/spool/sms/checked
failed = /var/spool/sms/failed
incoming = /var/spool/sms/incoming
sent = /var/spool/sms/sent
stats = /var/log/smstools/smsd_stats
loglevel = 7
delaytime = 10
#errorsleeptime = 10
blocktime = 3600
#stats = /var/log/smsd_stats
#stats_interval = 3600
#stats_no_zeroes = no
#checkhandler = /usr/local/bin/smscheck
receive_before_send = no
# autosplit 0=no 1=yes 2=with text numbers 3=concatenated
autosplit = 3
# store_received_pdu 0=no, 1=unsupported, 2=unsupported and 8bit, 3=all
#store_received_pdu = 1
#validity = 255
decode_unicode_text = yes
#internal_combine = no
# You can specify here an external program that is started whenever an alarm occurs.
# alarmhandler = /path/to/an/alarmhandler/script
# Specifies what levels start an alarmhandler. You can use value between 2 and 5.
# alarmlevel = 4
# eventhandler = @EVENTHANDLER@
#blacklist = /etc/smstools/blacklist
#whitelist = /etc/smstools/whitelist

#[queues]
# Commented lines are examples for germany
# D1 = /var/spool/sms/D1
# D2 = /var/spool/sms/D2
# O2 = /var/spool/sms/O2
# EPLUS = /var/spool/sms/EPLUS
# QUAM = /var/sppol/sms/QUAM
# MOBILCOM = /var/spool/sms/MOBILCOM
OTHER = /var/spool/sms/OTHER

#[provider]
# Commented lines are examples for germany
# D1 = 49160, 49170, 49171, 49175, 49151
# D2 = 491520, 49162, 49172, 49173, 49174
# O2 = 49176, 49179, 49159
# EPLUS = 49163, 49177, 49178, 49157
# QUAM = 49150
# MOBILCOM = 49156
OTHER = 0,1,2,3,4,5,6,7,8,9

[GSM1]
init = AT+CMGF=1
# # Windows: /dev/com1, Solaris: /dev/cua/a, Linux /dev/ttyS0
device = /dev/ttyUSB2
incoming = yes
queues = OTHER
# You don't need a PIN for mobile phones
# pin = 1111
mode = new
# smsc = 491722270000 --I do not know how to set the same time, or what?
baudrate = 19200
rtscts = yes
cs_convert = yes
report = no
memory_start = 0
check_memory_method = 2
# primary_memory = memory name
# secondary_memory = memory name
# secondary_memory_max = number
pdu_from_file = /var/spool/sms/GSM1-PDU
# sending_disabled = no
# decode_unicode_text = no
# internal_combine = no
#
#[GSM2]
#init = ATE0
# Windows: /dev/com2, Solaris: /dev/cua/b, Linux /dev/ttyS1
#device = /dev/ttyS1
#incoming = yes
#queues = OTHER
#You don't need a PIN for mobile phones
#pin = 2222
#mode = new
#smsc = 491710760000
#baudrate = 19200
#rtscts = yes
#cs_convert = yes
#report = no
#memory_start = 1
#primary_memory = memory name
#secondary_memory = memory name
#secondary_memory_max = number
#pdu_from_file = /var/spool/sms/GSM2-PDU
#sending_disabled = no
#decode_unicode_text = no
#internal_combine = no