Author |
Post |
|
#1 Wed Jul 07, 2010 12:48, 167 months ago.
|
Member
Registered: Jun 2010
Location: Kaunas, Lithuania
|
Hello,
I have two modems connected. And they are assigned to queue Q1. I send create files in outgoing directory with specified "Queue: Q1" but it seems that at the same time, only one modem is being used. Here is log and conf files.
http://62.212.213.138:8080/files/smsd.conf http://62.212.213.138:8080/files/log.log
|
|
#2 Wed Jul 07, 2010 13:11, 167 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
The log shows that both modems GSM10 and GSM11 are sending messages from Q1.
There are GSM20 and GSM21 also defined, but probably those processes have stopped because of the failure with opening a device. From the begin of a log you can see what was the failure.
|
|
#3 Wed Jul 07, 2010 13:17, 167 months ago.
|
Member
Registered: Jun 2010
Location: Kaunas, Lithuania
Topic owner
|
From 2010-07-07 15:32:37,6, GSM11: Moved file /var/spool/sms/Q1/job_16_5UWBwI to /var/spool/sms/sent/job_16_5UWBwI to 2010-07-07 15:34:10,6, GSM11: Moved file /var/spool/sms/Q1/job_16_GUflZa to /var/spool/sms/sent/job_16_GUflZa All sms between are sent using GSM11.
From 2010-07-07 15:34:19,6, GSM10: Moved file /var/spool/sms/Q1/job_16_GVhip9 to /var/spool/sms/sent/job_16_GVhip9 to 2010-07-07 15:34:58,6, GSM10: Moved file /var/spool/sms/Q1/job_16_UDCt15 to /var/spool/sms/sent/job_16_UDCt15 There only GSM10 is being used.
What I want is that both modems would be working ate the same time.
|
|
#4 Wed Jul 07, 2010 13:31, 167 months ago.
|
Administrator
Registered: May 2009
Location: Jyväskylä, Finland
|
Ok, there is a problem with spooling. I try to release 3.1.12 within a next few days to fix this.
In the meanwhile, use the modem setting trust_spool = no in the [default] section. Also a global setting delaytime = 1 could be usefull.
|
|
#5 Wed Jul 07, 2010 15:11, 167 months ago.
|
Member
Registered: Jun 2010
Location: Kaunas, Lithuania
Topic owner
|
Thanks, it helped.
|