SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Thu Mar 28, 2024 14:31
SMSTools3 Community » Help and support Bottom

Teltonika USB modem and +CPMS response

Login and Post Reply

Page:  1

Author Post
Member
Registered:
Sep 2010
Location: Brazil
Operating system name and version: Windows 7 + CYGWIN
Version of smsd: 3.1.12
Smsd installed from: sources
Name and model of a modem / phone: Teltonika 3G USB modem UM5100
Interface: USB

sometimes it works fine, but when the log shows the below msg, right after activation, it will not receive any SMS.
...
<- +CPMS: "ME",0,0,"ME",0,0,"SM",3,20 OK
GSM1: Used memory is 0 of 0
...
Not sure how to fix this, I had rebooted the whole thing to no avail.
thanks!
RR

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
Do you use any init string? If not, init = AT+CPMS="SM","SM","SM" could help.

Member
Registered:
Sep 2010
Location: Brazil
Topic owner
follow up:

I rebooted the PC, run teltonika's modem utility (comes with the modem to send/receive msg), sent a sms to the modem, saw it on the UI, stopped/exited the teltonika sw and run cygwin/smstools3.
Now it works.
Any comments?
thanks
RR

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
It looks like Teltonika's software initialized the modem to use SM memory. The init string should help. Reset the modem and try it without running Teltonika's software first.

Member
Registered:
Sep 2010
Location: Brazil
Topic owner
Keke, Teltonika's software is needed to create the virtual COM port.
I run it and then quit.
Is there any other way to create the com port?
Thanks!

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
If Teltonika's drivers do not create the port without running the utility, you just have to run it...

Have you tried the init string? It still should work.

Member
Registered:
Sep 2010
Location: Brazil
Topic owner
Keke, I am using the init string you recommended, so far so good, receiving/xmitting is perfect.
I am just intrigued by this error msg, please let me know if it is expected:

Trying to get stored message 20
2011-08-05 23:11:54,7, GSM13: -> AT+CMGR=20
2011-08-05 23:11:54,7, GSM13: Command is sent, waiting for the answer
2011-08-05 23:11:55,7, GSM13: <- +CMS ERROR: 321 (Invalid memory index)
2011-08-05 23:11:55,6, GSM13: No SMS received (reading interrupted)
2011-08-05 23:12:05,6, GSM13: Checking device for incoming SMS

BTW, what to do about the com port that changes depending on the USB port you use?
I created one modem section for each port, not sure there are more elegant solutions for this.

Thanks!
RR

Administrator
Registered:
May 2009
Location: Jyväskylä, Finland
If you still have errors while trying to receive messages, try a modem setting memory_start = 0. If it does not help, show your current setup and piece of a log which shows how smsd is trying to read first messages.

For changes of COM port I do not have any good hints currently.

Login and Post Reply

Page:  1

SMSTools3 Community » Help and support Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.