Thanks! I want to order one and I hope it will work.

iuriem wrote

Thanks! I want to order one and I hope it will work.

As long as the device is the same, it should work. Remember to use the settings shown in this post, and smsd 3.1.8.

OK! Thank you!

keke wrote

As long as the device is the same, it should work. Remember to use the settings shown in this post, and smsd 3.1.8.

keke wrote

As long as the device is the same, it should work. Remember to use the settings shown in this post, and smsd 3.1.8.

Can you recommend a good howto for smsd installation and setup?

iuriem wrote

keke wrote

As long as the device is the same, it should work. Remember to use the settings shown in this post, and smsd 3.1.8.

Can you recommend a good howto for smsd installation and setup?

You have received your modem now, right?

I do not know about "good" howto's...

The installation depends on your Operating System. If you are running Unix style OS, there is a short howto on How to compile/install. Basic installation will install a sample smsd.conf to the /etc/ directory. Modify that as shown in the post I mentioned, and BenQ will work.

If you have any troubles or questions while installing, you could open a new topic and describe at least what OS you are running.

Thank you. No, I do not received the modem yet (I am waiting), but I have an old mobile phone (SonyEricsson T300) and I want to try him as a sms device. My OS is Ubuntu Lucid.

HI

I have big problem with BenQ M32 gprs connection.

I don't know very well how to use AT-commands if I wand connect to Internet.
(Yes, I have read BenQ AT manual)

Problem is similar like

http://www.edaboard.com/thread151838.html

I've been using Google for the whole night.

Please, can somebody help and give some example "AT script"

Operator is TeleFinland

kaarme42 wrote

HI

I have big problem with BenQ M32 gprs connection.

I don't know very well how to use AT-commands if I wand connect to Internet.
(Yes, I have read BenQ AT manual)

Problem is similar like

http://www.edaboard.com/thread151838.html

I've been using Google for the whole night.

Please, can somebody help and give some example "AT script"

Operator is TeleFinland

Sorry, I cannot help you with this issue, which also is off-topic for smstools.

whether this modem can have 2 nodes/ports in linux? (sms and data simultaneously)

Ines wrote

whether this modem can have 2 nodes/ports in linux? (sms and data simultaneously)

It depends on drivers for networking, and I'm not experienced with them. Notice that this modem is GPRS, not 3G, meaning that network connection anyway is slow.

Some Huawei devices can provide 3G connection at the same time when other interface can be used for SMS messaging.

Hi, I have tried Keke's configuration but it is not working for me:


-----LOG-----
2012-07-24 20:08:09,2, smsd: Smsd v3.1.14 started.
2012-07-24 20:08:09,2, smsd: Running as root:root.
2012-07-24 20:08:09,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.QLDdvk /tmp/smsd_data.7dILpB
2012-07-24 20:08:09,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
2012-07-24 20:08:09,4, smsd: File mode creation mask: 022 (0644, rw-r--r--).
2012-07-24 20:08:09,5, smsd: Outgoing file checker has started. PID: 2032.
2012-07-24 20:08:09,7, smsd: All PID's: 2032,2034
2012-07-24 20:08:09,5, GSM2: Modem handler 0 has started. PID: 2034.
2012-07-24 20:08:09,5, GSM2: Using check_memory_method 31: CMGL is used and messages are taken from the list.
2012-07-24 20:08:09,6, GSM2: Checking device for incoming SMS
2012-07-24 20:08:09,6, GSM2: Checking if modem is ready
2012-07-24 20:08:09,7, GSM2: -> AT
2012-07-24 20:08:09,7, GSM2: Command is sent
2012-07-24 20:08:10,7, GSM2: -> AT
2012-07-24 20:08:10,7, GSM2: Command is sent, waiting for the answer
2012-07-24 20:08:15,7, GSM2: put_command expected (OK)|(ERROR), timeout occurred. 1.
2012-07-24 20:08:15,7, GSM2: <-
2012-07-24 20:08:15,7, GSM2: -> 
2012-07-24 20:08:15,7, GSM2: Command is sent, waiting for the answer
2012-07-24 20:08:20,7, GSM2: put_command expected (OK)|(ERROR), timeout occurred. 2.
2012-07-24 20:08:20,7, GSM2: <-
2012-07-24 20:08:20,7, GSM2: -> AT
2012-07-24 20:08:20,7, GSM2: Command is sent, waiting for the answer
2012-07-24 20:08:25,7, GSM2: put_command expected (OK)|(ERROR), timeout occurred. 3.
2012-07-24 20:08:25,7, GSM2: <-
2012-07-24 20:08:25,7, GSM2: -> 
2012-07-24 20:08:25,7, GSM2: Command is sent, waiting for the answer

Can anyone please help me on this?

I am running smstools3 on Ubuntu 10.04LTS with this exact same modem from Dealextreme.
Thanks!
Trica79