Operating system name and version: CentOS 5.8
Version of smsd: 3.1.14
Smsd installed from: sources
Name and model of a modem / phone: Falcom Tango 55
Interface: serial
Hi
we have Problems sending SMS. For years it worked fine. But now smsd failed to send Messsages.
The log says, that the SMS was sent successfully, but the SMS did not receive.
We checked the SIM with the Provider. It's OK.
Logfile :
2012-08-15 15:47:37,5, GSM1: Waiting for messages to send...
2012-08-15 15:48:35,5, smsd: Moved file /var/spool/sms/outgoing/send_QN3926 to /var/spool/sms/checked
2012-08-15 15:48:36,6, GSM1: I have to send 1 short message for /var/spool/sms/checked/send_QN3926
2012-08-15 15:48:36,6, GSM1: Sending SMS from to 49xxxxxxxxxxx
2012-08-15 15:48:36,6, GSM1: Checking if modem is ready
2012-08-15 15:48:37,7, GSM1: -> AT
2012-08-15 15:48:37,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:37,7, GSM1: <- OK
2012-08-15 15:48:37,6, GSM1: Pre-initializing modem
2012-08-15 15:48:37,7, GSM1: -> ATE0+CMEE=1;+CREG=2
2012-08-15 15:48:37,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:37,7, GSM1: <- OK
2012-08-15 15:48:37,6, GSM1: Checking if modem needs PIN
2012-08-15 15:48:38,7, GSM1: -> AT+CPIN?
2012-08-15 15:48:38,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:38,7, GSM1: <- +CPIN: READY OK
2012-08-15 15:48:38,7, GSM1: -> AT+CSQ
2012-08-15 15:48:38,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:38,7, GSM1: <- +CSQ: 25,99 OK
2012-08-15 15:48:38,6, GSM1: Signal Strength Indicator: (25,99) -63 dBm (Excellent), Bit Error Rate: not known or not detectable
2012-08-15 15:48:38,6, GSM1: Checking if Modem is registered to the network
2012-08-15 15:48:39,7, GSM1: -> AT+CREG?
2012-08-15 15:48:39,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:39,7, GSM1: <- +CREG: 2,1 OK
2012-08-15 15:48:39,6, GSM1: Modem is registered to the network
2012-08-15 15:48:39,6, GSM1: Selecting PDU mode
2012-08-15 15:48:39,7, GSM1: -> AT+CMGF=0
2012-08-15 15:48:39,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:39,7, GSM1: <- OK
2012-08-15 15:48:39,6, GSM1: Changing SMSC
2012-08-15 15:48:40,7, GSM1: -> AT+CSCA="+4917XXXXXXXXX"
2012-08-15 15:48:40,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:40,7, GSM1: <- OK
2012-08-15 15:48:40,7, GSM1: -> AT+CMGS=29
2012-08-15 15:48:40,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:41,7, GSM1: <- >
2012-08-15 15:48:41,7, GSM1: -> 0011000C919471252207130000FF11D4F29C0EB2BFDB206AD87D7E836A35
2012-08-15 15:48:41,7, GSM1: Command is sent, waiting for the answer
2012-08-15 15:48:41,7, GSM1: <- OK
2012-08-15 15:48:41,5, GSM1: SMS sent, Message_id: , To: 4917XXXXXXXXX, sending time 5 sec.
2012-08-15 15:48:41,6, GSM1: Deleted file /var/spool/sms/checked/send_QN3926
Any hints ?
thx
Gunnar