Operating system name and version: Linux Lubuntu-eee 3.2.0-38-generic-pae #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 i686 i686 i386 GNU/Linux
Version of smsd: 3.1.15
Smsd installed from: sources
Name and model of a modem: Huawei e353 (12d1:1442 Huawei Technologies Co., Ltd.)
Interface: USB

I can send message from USB dongle to the phone. But I can't receive. I can check received messages from the Web UI (192.168.1.1), but smsd does not collect them from dongle to hard drive.

2013-03-02 00:27:54,5, smsd: Moved file /var/spool/sms/outgoing/send_sms.sms to /var/spool/sms/checked 2013-03-02 00:27:56,6, GSM: I have to send 1 short message for /var/spool/sms/checked/send_sms.sms 2013-03-02 00:28:01,5, GSM: SMS sent, Message_id: 6, To: 35845xxxxxxx, sending time 5 sec. 2013-03-02 00:28:01,6, GSM: Deleted file /var/spool/sms/checked/send_sms.sms

Here is my conf file.

devices = GSM logfile = /var/log/smsd.log loglevel = 7 [GSM] init = AT+CPMS="ME","ME","ME" device = /dev/ttyUSB0 check_memory_method = 3 incoming = yes outgoing = yes signal_quality_ber_ignore = yes report = yes

Older model Huawei e160 seems to work just fine, but not to me this newer model.

Best Regards Asmo Koskinen.

Huawei devices usually provides more than one interfaces and incoming messages are not shown with all of these. Use dmesg to see what interfaces are provided, and try to use some other than the first USB0.

If this does not help, send two SMS to your device and restart smsd with a modem setting report_device_details = yes. The log will show what there is and where, if anywhere.

keke wrote

If this does not help, send two SMS to your device and restart smsd with a modem setting report_device_details = yes. The log will show what there is and where, if anywhere.

Thank you, Keke. Here is what I did try.

[ 408.441262] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 408.444757] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1

If I try USB1 I got this. Here is my conf file with working USB0. USB1 does not work (put_command expected (OK)|(ERROR), timeout occurred.)?

[GSM] init = AT+CPMS="ME","ME","ME" device = /dev/ttyUSB0 check_memory_method = 3 incoming = yes outgoing = yes signal_quality_ber_ignore = yes report = yes report_device_details = yes

2013-03-02 08:46:46,2, smsd: Smsd v3.1.15 started. 2013-03-02 08:46:46,2, smsd: Running as root:root. 2013-03-02 08:46:46,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.JCleth /tmp/smsd_data.ZOQTIF 2013-03-02 08:46:46,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2013-03-02 08:46:46,4, smsd: File mode creation mask: 02 (0664, rw-rw-r--). 2013-03-02 08:46:46,5, smsd: Outgoing file checker has started. PID: 3454. 2013-03-02 08:46:46,7, smsd: All PID's: 3454,3456 2013-03-02 08:46:46,5, GSM: Modem handler 0 has started. PID: 3456. 2013-03-02 08:46:46,5, GSM: Using check_memory_method 3: CMGL is used. 2013-03-02 08:46:46,6, GSM: Checking device for incoming SMS 2013-03-02 08:46:46,6, GSM: Checking if modem is ready 2013-03-02 08:46:46,7, GSM: -> AT 2013-03-02 08:46:46,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:46:51,7, GSM: put_command expected (OK)|(ERROR), timeout occurred. 1. 2013-03-02 08:46:51,7, GSM: <- 2013-03-02 08:46:51,7, GSM: -> . [--] 2013-03-02 08:47:02,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 3454. 2013-03-02 08:47:02,7, GSM: put_command expected (OK)|(ERROR), timeout occurred. 4. 2013-03-02 08:47:02,7, GSM: <- 2013-03-02 08:47:02,2, GSM: Modem handler 0 terminated. PID: 3456, was started 13-03-02 08:46:46. 2013-03-02 08:47:02,2, smsd: Smsd mainprocess terminated. PID 3454, was started 13-03-02 08:46:46.

With USB0 I got these ones. No messages to receive.

2013-03-02 08:54:40,2, smsd: Smsd v3.1.15 started. 2013-03-02 08:54:40,2, smsd: Running as root:root. 2013-03-02 08:54:40,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.YEVOGK /tmp/smsd_data.5FpcS2 2013-03-02 08:54:40,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2013-03-02 08:54:40,4, smsd: File mode creation mask: 02 (0664, rw-rw-r--). 2013-03-02 08:54:40,5, smsd: Outgoing file checker has started. PID: 3641. 2013-03-02 08:54:40,7, smsd: All PID's: 3641,3643 2013-03-02 08:54:40,5, GSM: Modem handler 0 has started. PID: 3643. 2013-03-02 08:54:40,5, GSM: Using check_memory_method 3: CMGL is used. 2013-03-02 08:54:40,6, GSM: Checking device for incoming SMS 2013-03-02 08:54:40,6, GSM: Checking if modem is ready 2013-03-02 08:54:40,7, GSM: -> AT 2013-03-02 08:54:40,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:40,7, GSM: <- OK 2013-03-02 08:54:40,6, GSM: Pre-initializing modem 2013-03-02 08:54:41,7, GSM: -> ATE0+CMEE=1;+CREG=2 2013-03-02 08:54:41,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:41,7, GSM: <- OK 2013-03-02 08:54:41,6, GSM: Checking if modem needs PIN 2013-03-02 08:54:41,7, GSM: -> AT+CPIN? 2013-03-02 08:54:41,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:41,7, GSM: <- +CPIN: READY OK 2013-03-02 08:54:41,6, GSM: Initializing modem 2013-03-02 08:54:42,7, GSM: -> AT+CPMS="ME","ME","ME" 2013-03-02 08:54:42,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:42,7, GSM: <- +CPMS: 0,20,0,20,0,20 OK 2013-03-02 08:54:42,7, GSM: -> AT+CSQ 2013-03-02 08:54:42,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:42,7, GSM: <- +CSQ: 21,99 OK 2013-03-02 08:54:42,6, GSM: Signal Strength Indicator: (21,99) -71 dBm (Excellent) 2013-03-02 08:54:42,6, GSM: Checking if Modem is registered to the network 2013-03-02 08:54:43,7, GSM: -> AT+CREG? 2013-03-02 08:54:43,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:43,7, GSM: <- +CREG: 2,5,"5618","3848" OK 2013-03-02 08:54:43,6, GSM: Modem is registered to a roaming partner network 2013-03-02 08:54:43,6, GSM: Location area code: 5618, Cell ID: 3848 2013-03-02 08:54:43,7, GSM: -> AT+CSQ 2013-03-02 08:54:43,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:43,7, GSM: <- +CSQ: 21,99 OK 2013-03-02 08:54:43,6, GSM: Signal Strength Indicator: (21,99) -71 dBm (Excellent) 2013-03-02 08:54:43,6, GSM: Selecting PDU mode 2013-03-02 08:54:44,7, GSM: -> AT+CMGF=0 2013-03-02 08:54:44,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:44,7, GSM: <- OK 2013-03-02 08:54:44,7, GSM: -> AT+CIMI 2013-03-02 08:54:44,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:44,7, GSM: <- 244212001088563 OK 2013-03-02 08:54:45,7, GSM: -> AT+CGSN 2013-03-02 08:54:45,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:45,7, GSM: <- 867989012508129 OK 2013-03-02 08:54:45,5, GSM: CGSN: 867989012508129 2013-03-02 08:54:45,5, GSM: IMSI: 244212001088563 2013-03-02 08:54:45,6, GSM: Checking if reading of messages is supported 2013-03-02 08:54:45,7, GSM: -> AT+CPMS? 2013-03-02 08:54:45,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:45,7, GSM: <- +CPMS: "ME",0,20,"ME",0,20,"ME",0,20 OK 2013-03-02 08:54:45,7, GSM: ## Start of device details 2013-03-02 08:54:45,7, GSM: # Manufacturer identification: 2013-03-02 08:54:46,7, GSM: -> AT+CGMI 2013-03-02 08:54:46,7, GSM: <- huawei OK 2013-03-02 08:54:46,7, GSM: # Model identification: 2013-03-02 08:54:46,7, GSM: -> AT+CGMM 2013-03-02 08:54:46,7, GSM: <- E353 OK 2013-03-02 08:54:46,7, GSM: # Revision identification: 2013-03-02 08:54:47,7, GSM: -> AT+CGMR 2013-03-02 08:54:47,7, GSM: <- 22.157.09.00.00 OK 2013-03-02 08:54:47,7, GSM: # New message indications, list of supported modes: 2013-03-02 08:54:47,7, GSM: -> AT+CNMI=? 2013-03-02 08:54:47,7, GSM: <- +CNMI: (0-2),(0-3),(0,2),(0-2),(0,1) OK 2013-03-02 08:54:47,7, GSM: # New message indications, current settings: 2013-03-02 08:54:48,7, GSM: -> AT+CNMI? 2013-03-02 08:54:48,7, GSM: <- +CNMI: 2,1,2,2,0 OK 2013-03-02 08:54:48,7, GSM: # Preferred message storage, list of supported mem's: 2013-03-02 08:54:48,7, GSM: -> AT+CPMS=? 2013-03-02 08:54:48,7, GSM: <- +CPMS: ("SM","ME"),("SM","ME"),("SM","ME") OK 2013-03-02 08:54:48,7, GSM: # Phonebook storage, available mem's: 2013-03-02 08:54:49,7, GSM: -> AT+CPBS=? 2013-03-02 08:54:49,7, GSM: <- +CPBS: ("SM","EN","ON") OK 2013-03-02 08:54:49,7, GSM: # List messages, list of supported stat's: 2013-03-02 08:54:49,7, GSM: -> AT+CMGL=? 2013-03-02 08:54:49,7, GSM: <- +CMGL: (0-4) OK 2013-03-02 08:54:50,7, GSM: # Delete message, list of supported values: 2013-03-02 08:54:50,7, GSM: -> AT+CMGD=? 2013-03-02 08:54:50,7, GSM: <- +CMGD: (),(0-4) OK 2013-03-02 08:54:50,7, GSM: # Phone activity status, list of supported stat's: 2013-03-02 08:54:50,7, GSM: -> AT+CPAS=? 2013-03-02 08:54:51,7, GSM: <- +CPAS: (0-5) OK 2013-03-02 08:54:51,7, GSM: # TE character set, list of supported charset's: 2013-03-02 08:54:51,7, GSM: -> AT+CSCS=? 2013-03-02 08:54:51,7, GSM: <- +CSCS: ("IRA","UCS2","GSM") OK 2013-03-02 08:54:51,7, GSM: # TE character set, current setting: 2013-03-02 08:54:51,7, GSM: -> AT+CSCS? 2013-03-02 08:54:52,7, GSM: <- +CSCS: "IRA" OK 2013-03-02 08:54:52,7, GSM: ## End of device details 2013-03-02 08:54:52,6, GSM: Checking memory size 2013-03-02 08:54:52,7, GSM: -> AT+CMGL=4 2013-03-02 08:54:52,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:54:52,7, GSM: <- OK 2013-03-02 08:54:52,6, GSM: Used memory is 0 2013-03-02 08:54:52,6, GSM: No SMS received 2013-03-02 08:55:02,6, GSM: Checking device for incoming SMS 2013-03-02 08:55:02,6, GSM: Checking if modem is ready 2013-03-02 08:55:02,7, GSM: -> AT 2013-03-02 08:55:02,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:55:03,7, GSM: <- OK 2013-03-02 08:55:03,6, GSM: Pre-initializing modem 2013-03-02 08:55:03,7, GSM: -> ATE0+CMEE=1;+CREG=2 2013-03-02 08:55:03,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:55:03,7, GSM: <- OK 2013-03-02 08:55:03,6, GSM: Initializing modem 2013-03-02 08:55:03,7, GSM: -> AT+CPMS="ME","ME","ME" 2013-03-02 08:55:03,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:55:04,7, GSM: <- +CPMS: 0,20,0,20,0,20 OK 2013-03-02 08:55:04,7, GSM: -> AT+CSQ 2013-03-02 08:55:04,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:55:04,7, GSM: <- +CSQ: 21,99 OK 2013-03-02 08:55:04,6, GSM: Signal Strength Indicator: (21,99) -71 dBm (Excellent) 2013-03-02 08:55:04,6, GSM: Checking if Modem is registered to the network 2013-03-02 08:55:04,7, GSM: -> AT+CREG? 2013-03-02 08:55:04,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:55:05,7, GSM: <- +CREG: 2,5,"5618","3848" OK 2013-03-02 08:55:05,6, GSM: Modem is registered to a roaming partner network 2013-03-02 08:55:05,6, GSM: Selecting PDU mode 2013-03-02 08:55:05,7, GSM: -> AT+CMGF=0 2013-03-02 08:55:05,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:55:05,7, GSM: <- OK 2013-03-02 08:55:05,6, GSM: Checking memory size 2013-03-02 08:55:05,7, GSM: -> AT+CMGL=4 2013-03-02 08:55:05,7, GSM: Command is sent, waiting for the answer 2013-03-02 08:55:06,7, GSM: <- OK 2013-03-02 08:55:06,6, GSM: Used memory is 0 2013-03-02 08:55:06,6, GSM: No SMS received 2013-03-02 08:55:15,2, smsd: Smsd mainprocess is awaiting the termination of all modem handlers. PID: 3641. 2013-03-02 08:55:15,2, GSM: Modem handler 0 terminated. PID: 3643, was started 13-03-02 08:54:40. 2013-03-02 08:55:15,2, smsd: Smsd mainprocess terminated. PID 3641, was started 13-03-02 08:54:40.

Sending messages with USB0 is ok.

2013-03-02 09:00:14,2, smsd: Smsd v3.1.15 started. 2013-03-02 09:00:14,2, smsd: Running as root:root. 2013-03-02 09:00:14,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.hzaKzn /tmp/smsd_data.kwRH5G 2013-03-02 09:00:14,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2013-03-02 09:00:14,4, smsd: File mode creation mask: 02 (0664, rw-rw-r--). 2013-03-02 09:00:14,5, smsd: Outgoing file checker has started. PID: 3712. 2013-03-02 09:00:14,7, smsd: All PID's: 3712,3714 2013-03-02 09:00:14,5, GSM: Modem handler 0 has started. PID: 3714. 2013-03-02 09:00:14,5, GSM: Using check_memory_method 3: CMGL is used. 2013-03-02 09:00:14,6, GSM: Checking device for incoming SMS 2013-03-02 09:00:14,6, GSM: Checking if modem is ready 2013-03-02 09:00:15,3, GSM: Unexpected input: ^RSSI: 16 ^RSSI: 19 ^RSSI: 22 ^RSSI: 16 ^RSSI: 19 ^RSSI: 22 ^RSSI: 18 ^RSSI: 21 2013-03-02 09:00:15,7, GSM: -> AT 2013-03-02 09:00:15,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:15,7, GSM: <- OK 2013-03-02 09:00:15,6, GSM: Pre-initializing modem 2013-03-02 09:00:15,7, GSM: -> ATE0+CMEE=1;+CREG=2 2013-03-02 09:00:15,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:16,7, GSM: <- OK 2013-03-02 09:00:16,6, GSM: Checking if modem needs PIN 2013-03-02 09:00:16,7, GSM: -> AT+CPIN? 2013-03-02 09:00:16,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:16,7, GSM: <- +CPIN: READY OK 2013-03-02 09:00:16,6, GSM: Initializing modem 2013-03-02 09:00:16,5, smsd: Moved file /var/spool/sms/outgoing/send_sms.sms to /var/spool/sms/checked 2013-03-02 09:00:16,7, GSM: -> AT+CPMS="ME","ME","ME" 2013-03-02 09:00:16,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:17,7, GSM: <- +CPMS: 0,20,0,20,0,20 OK 2013-03-02 09:00:17,7, GSM: -> AT+CSQ 2013-03-02 09:00:17,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:17,7, GSM: <- +CSQ: 21,99 OK 2013-03-02 09:00:17,6, GSM: Signal Strength Indicator: (21,99) -71 dBm (Excellent) 2013-03-02 09:00:17,6, GSM: Checking if Modem is registered to the network 2013-03-02 09:00:17,7, GSM: -> AT+CREG? 2013-03-02 09:00:17,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:18,7, GSM: <- +CREG: 2,5,"5618","3848" OK 2013-03-02 09:00:18,6, GSM: Modem is registered to a roaming partner network 2013-03-02 09:00:18,6, GSM: Location area code: 5618, Cell ID: 3848 2013-03-02 09:00:18,7, GSM: -> AT+CSQ 2013-03-02 09:00:18,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:18,7, GSM: <- +CSQ: 21,99 OK 2013-03-02 09:00:18,6, GSM: Signal Strength Indicator: (21,99) -71 dBm (Excellent) 2013-03-02 09:00:18,6, GSM: Selecting PDU mode 2013-03-02 09:00:18,7, GSM: -> AT+CMGF=0 2013-03-02 09:00:18,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:18,7, GSM: <- OK 2013-03-02 09:00:19,7, GSM: -> AT+CIMI 2013-03-02 09:00:19,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:19,7, GSM: <- 244212001088563 OK 2013-03-02 09:00:19,7, GSM: -> AT+CGSN 2013-03-02 09:00:19,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:19,7, GSM: <- 867989012508129 OK 2013-03-02 09:00:19,5, GSM: CGSN: 867989012508129 2013-03-02 09:00:19,5, GSM: IMSI: 244212001088563 2013-03-02 09:00:19,6, GSM: Checking if reading of messages is supported 2013-03-02 09:00:20,7, GSM: -> AT+CPMS? 2013-03-02 09:00:20,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:20,7, GSM: <- +CPMS: "ME",0,20,"ME",0,20,"ME",0,20 OK 2013-03-02 09:00:20,7, GSM: ## Start of device details 2013-03-02 09:00:20,7, GSM: # Manufacturer identification: 2013-03-02 09:00:20,7, GSM: -> AT+CGMI 2013-03-02 09:00:20,7, GSM: <- huawei OK 2013-03-02 09:00:20,7, GSM: # Model identification: 2013-03-02 09:00:21,7, GSM: -> AT+CGMM 2013-03-02 09:00:21,7, GSM: <- E353 OK 2013-03-02 09:00:21,7, GSM: # Revision identification: 2013-03-02 09:00:21,7, GSM: -> AT+CGMR 2013-03-02 09:00:21,7, GSM: <- 22.157.09.00.00 OK 2013-03-02 09:00:21,7, GSM: # New message indications, list of supported modes: 2013-03-02 09:00:22,7, GSM: -> AT+CNMI=? 2013-03-02 09:00:22,7, GSM: <- +CNMI: (0-2),(0-3),(0,2),(0-2),(0,1) OK 2013-03-02 09:00:22,7, GSM: # New message indications, current settings: 2013-03-02 09:00:22,7, GSM: -> AT+CNMI? 2013-03-02 09:00:22,7, GSM: <- +CNMI: 2,1,2,2,0 OK 2013-03-02 09:00:22,7, GSM: # Preferred message storage, list of supported mem's: 2013-03-02 09:00:23,7, GSM: -> AT+CPMS=? 2013-03-02 09:00:23,7, GSM: <- +CPMS: ("SM","ME"),("SM","ME"),("SM","ME") OK 2013-03-02 09:00:23,7, GSM: # Phonebook storage, available mem's: 2013-03-02 09:00:23,7, GSM: -> AT+CPBS=? 2013-03-02 09:00:23,7, GSM: <- +CPBS: ("SM","EN","ON") OK 2013-03-02 09:00:23,7, GSM: # List messages, list of supported stat's: 2013-03-02 09:00:24,7, GSM: -> AT+CMGL=? 2013-03-02 09:00:24,7, GSM: <- +CMGL: (0-4) OK 2013-03-02 09:00:24,7, GSM: # Delete message, list of supported values: 2013-03-02 09:00:24,7, GSM: -> AT+CMGD=? 2013-03-02 09:00:24,7, GSM: <- +CMGD: (),(0-4) OK 2013-03-02 09:00:24,7, GSM: # Phone activity status, list of supported stat's: 2013-03-02 09:00:25,7, GSM: -> AT+CPAS=? 2013-03-02 09:00:25,7, GSM: <- +CPAS: (0-5) OK 2013-03-02 09:00:25,7, GSM: # TE character set, list of supported charset's: 2013-03-02 09:00:25,7, GSM: -> AT+CSCS=? 2013-03-02 09:00:25,7, GSM: <- +CSCS: ("IRA","UCS2","GSM") OK 2013-03-02 09:00:25,7, GSM: # TE character set, current setting: 2013-03-02 09:00:26,7, GSM: -> AT+CSCS? 2013-03-02 09:00:26,7, GSM: <- +CSCS: "IRA" OK 2013-03-02 09:00:26,7, GSM: ## End of device details 2013-03-02 09:00:26,6, GSM: Checking memory size 2013-03-02 09:00:26,7, GSM: -> AT+CMGL=4 2013-03-02 09:00:26,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:26,7, GSM: <- OK 2013-03-02 09:00:26,6, GSM: Used memory is 0 2013-03-02 09:00:26,6, GSM: No SMS received 2013-03-02 09:00:27,6, GSM: I have to send 1 short message for /var/spool/sms/checked/send_sms.sms 2013-03-02 09:00:27,6, GSM: Sending SMS from to 35845xxxxxxx 2013-03-02 09:00:27,6, GSM: Checking if modem is ready 2013-03-02 09:00:27,7, GSM: -> AT 2013-03-02 09:00:27,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:27,7, GSM: <- OK 2013-03-02 09:00:27,6, GSM: Pre-initializing modem 2013-03-02 09:00:27,7, GSM: -> ATE0+CMEE=1;+CREG=2 2013-03-02 09:00:27,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:28,7, GSM: <- OK 2013-03-02 09:00:28,6, GSM: Initializing modem 2013-03-02 09:00:28,7, GSM: -> AT+CPMS="ME","ME","ME" 2013-03-02 09:00:28,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:28,7, GSM: <- +CPMS: 0,20,0,20,0,20 OK 2013-03-02 09:00:28,7, GSM: -> AT+CSQ 2013-03-02 09:00:28,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:29,7, GSM: <- +CSQ: 21,99 OK 2013-03-02 09:00:29,6, GSM: Signal Strength Indicator: (21,99) -71 dBm (Excellent) 2013-03-02 09:00:29,6, GSM: Checking if Modem is registered to the network 2013-03-02 09:00:29,7, GSM: -> AT+CREG? 2013-03-02 09:00:29,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:29,7, GSM: <- +CREG: 2,5,"5618","3848" OK 2013-03-02 09:00:29,6, GSM: Modem is registered to a roaming partner network 2013-03-02 09:00:29,6, GSM: Selecting PDU mode 2013-03-02 09:00:29,7, GSM: -> AT+CMGF=0 2013-03-02 09:00:29,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:30,7, GSM: <- OK 2013-03-02 09:00:30,7, GSM: -> AT+CMGS=67 2013-03-02 09:00:30,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:30,7, GSM: <- > 2013-03-02 09:00:30,7, GSM: -> 0031000C915348852966610000FF3CC8329BFD6681E8E8F41C949E83C2207A194F07D1D1613A28091A87DDA079D94D06DDD3743468DA9C82A665B9BD2C0751DF6FF6DC05. 2013-03-02 09:00:30,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:32,7, GSM: <- +CMGS: 18 OK 2013-03-02 09:00:32,5, GSM: SMS sent, Message_id: 18, To: 35845xxxxxxx, sending time 5 sec. 2013-03-02 09:00:32,6, GSM: Deleted file /var/spool/sms/checked/send_sms.sms 2013-03-02 09:00:32,6, GSM: Checking device for incoming SMS 2013-03-02 09:00:32,6, GSM: Checking memory size 2013-03-02 09:00:32,7, GSM: -> AT+CMGL=4 2013-03-02 09:00:32,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:33,7, GSM: <- OK 2013-03-02 09:00:33,6, GSM: Used memory is 0 2013-03-02 09:00:33,6, GSM: No SMS received 2013-03-02 09:00:33,6, GSM: Checking device for incoming SMS 2013-03-02 09:00:33,6, GSM: Checking memory size 2013-03-02 09:00:33,7, GSM: -> AT+CMGL=4 2013-03-02 09:00:33,7, GSM: Command is sent, waiting for the answer 2013-03-02 09:00:33,7, GSM: <- OK 2013-03-02 09:00:33,6, GSM: Used memory is 0 2013-03-02 09:00:33,6, GSM: No SMS received [--]

Best Regards Asmo Koskinen.

Try with init = AT+CPMS="SM","SM","SM"

keke wrote

Try with init = AT+CPMS="SM","SM","SM"

No change - USB1.

2013-03-02 16:24:09,2, smsd: Running as root:root. 2013-03-02 16:24:09,7, smsd: Running startup_check (shell): /var/spool/sms/incoming/smsd_script.Zniz1M /tmp/smsd_data.UCSz6I 2013-03-02 16:24:09,7, smsd: Done: startup_check (shell), execution time 0 sec., status: 0 (0) 2013-03-02 16:24:09,4, smsd: File mode creation mask: 02 (0664, rw-rw-r--). 2013-03-02 16:24:09,5, smsd: Outgoing file checker has started. PID: 5024. 2013-03-02 16:24:09,7, smsd: All PID's: 5024,5026 2013-03-02 16:24:09,5, GSM: Modem handler 0 has started. PID: 5026. 2013-03-02 16:24:09,5, GSM: Using check_memory_method 3: CMGL is used. 2013-03-02 16:24:09,6, GSM: Checking device for incoming SMS 2013-03-02 16:24:09,6, GSM: Checking if modem is ready 2013-03-02 16:24:09,7, GSM: -> AT 2013-03-02 16:24:09,7, GSM: Command is sent, waiting for the answer 2013-03-02 16:24:14,7, GSM: put_command expected (OK)|(ERROR), timeout occurred. 1. 2013-03-02 16:24:14,7, GSM: <- 2013-03-02 16:24:14,7, GSM: -> ^Z 2013-03-02 16:24:14,7, GSM: Command is sent, waiting for the answer 2013-03-02 16:24:19,7, GSM: put_command expected (OK)|(ERROR), timeout occurred. 2. 2013-03-02 16:24:19,7, GSM: <-

With USB0 I can send (for example by playSMS). But no received messages from dongle.

Best Regards Asmo Koskinen.

I give up. I can send, but not receive. I have to found older, but working dongle for my travel project. Keke - thank you for your time and support with this most excellent software.

ltsp@Lubuntu-eee:~$ cat /var/spool/sms/sent/send_sms.sms To: 35840xxxxxxx Modem: GSM Sent: 13-03-04 03:00:38 Message_id: 5 IMSI: 244212001088563 Hello, this is a text that I can send with SMS Server Tools.

Best Regards Asmo Koskinen.

I have now Nokia CS-17, it works OK.

ltsp@Lubuntu-eee:~$ cat /var/spool/sms/incoming/GSM.qr7sGB From: 35845xxxxxxx From_TOA: 91 international, ISDN/telephone From_SMSC: 358508771035 Sent: 13-03-04 15:23:33 Received: 13-03-04 15:23:37 Subject: GSM Modem: GSM IMSI: 244915810098636 Report: no Alphabet: ISO Length: 21 Nokia CS-17 Works OK.

Case closed for me...

Best Regards Asmo Koskinen.

Here with RasPi.

http://ltsp.fi/howto/RasPi/RasPi_SMS.png

http://www.raspberrypi.org/phpBB3/viewtopic.php?f=36&t=35933

Best Regards Asmo Koskinen.

Great to see that you have a working device for your journey .

I do not know what is wrong with e353. In this forum one member has used it successfully, but under Windows/Cygwin.

I have e153, and it provides five ports. However right now I cannot test which ports are working or not.