SMS Server Tools 3
This site is hosted by Kekekasvi.com
 Menu
Basic information:
Additional information:
Support:
Get SMS Server Tools 3:
Additional Options

 Sponsored links

 Search
Custom Search

 Visitor locations
 
 SMS Server Tools 3 Community
Welcome, Guest. Please login or register. Tue Mar 09, 2021 04:36
SMSTools3 Community » Help and support Bottom

Error 500

Login and Post Reply

Page:  1

Author Post
Member
Registered:
Apr 2013
Location: Liege, Belgium
Operating system name and version: CentOS 5
Version of smsd:
Smsd installed from: package repository
Name and model of a modem / phone: Huawei E220
Interface: USB

Hello,

I'm trying to configure SMSD to be able to send SMS messages through my Huawei connected on port /dev/ttyUSB0.
But I have an issue...
When SMSD tries to send the Message (AT+CMGS), he received the error: +CMS ERROR: 500

Here is my smsd.conf:

devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7

[GSM1]
device = /dev/ttyUSB0
incoming = no
init = AT^CURC=0
baudrate = 9600
#rtscts = no
pin = XXXX


And here is the log with the error:



Do you have any clue of the issue ?

Thanks in advance for your help.

Best regards,

Member
Registered:
Apr 2013
Location: Liege, Belgium
Topic owner
Sorry, I forgot to mention the version of SMSD: 3.0.10-4.el5.i386

I have also tried to add the SMSC parameter in the smsd.conf but still the same issue.

Thanks again for your help.

Member
Registered:
Apr 2013
Location: Liege, Belgium
Topic owner
Some complement of information...

I've tried also with the following parameters in the smsd.conf:



But still the same result...

One question, I've seen different threads concerning the international numbers or short numbers.
All example that I saw was for germans number or uk numbers with 12 digits.
Here in Belgium, the number has only 11 digits (see smsc number).

Can it be the problem ?

Thanks one more time for your support...

Member
Registered:
Apr 2013
Location: Liege, Belgium
Topic owner
After 3 days of different tries... I'm still having the same issue.
I'm able to receive SMS but I'm not able to send one !!!

I've updated my smsd to the latest version, so here is my current configuration:

Operating system name and version: CentOS 5.9
Version of smsd: 3.1.15
Smsd installed from: Source
Name and model of a modem / phone: Huawei E220
Interface: USB


My smsd.conf file:
devices = GSM1
logfile = /var/log/smsd.log
loglevel = 7

[GSM1]
device = /dev/ttyUSB0
incoming = no
#init = AT+CPMS="ME","ME","ME"
init = AT^CURC=0
#init = AT+CSCS="GSM"
memory_start = 0
baudrate = 19200
pin = 1234
smsc = 32475161616
 
'smsdconf' Syntax Highlight powered by GeSHi

Note: I've tried the different init parameter (in comment) one by one... but still the sqme error!

And here is the log with the error:


Please, can you help me because I'm really lost...

Thanks in advance for your support.

Pierre

Member
Registered:
Apr 2013
Location: Liege, Belgium
Topic owner
Well,

You can close this topic...
I've found the solution !!!

My last configuration was good... and it worked after unplugging and replugging the USB modem !!!

Best regards,

Login and Post Reply

Page:  1

SMSTools3 Community » Help and support Top

 
Time in this board is UTC.  

Privacy Policy   SMS Server Tools 3 Copyright © Keijo Kasvi.