Dear Community. Please help to start sending messages with SMStools.
I am a newbie, but really want to solve the issue (I need to have alerts in form of SMS)
I have Asus N56U router with custom firmware (Padavan) version 3.0.3.8-081
In USB port I have Huawey E1550 (with GSM sim card)
SMSTools was installed from package repository (using command opkg install)
After booting I have following log:
Feb 13 16:54:30 smsd: MAINPROCESS: Smsd v3.1.15 started.
Feb 13 16:54:30 smsd: MAINPROCESS: Running as admin:admin.
Feb 13 16:54:30 smsd: MAINPROCESS: There was 1 error while reading the config file:
Feb 13 16:54:30 smsd: MAINPROCESS: - There are no devices specified.
Feb 13 16:54:30 smsd: MAINPROCESS: Checked directory /opt/var/spool/sms/checked cannot be opened.
Feb 13 16:54:30 smsd: MAINPROCESS: Running startup_check (shell): /opt/var/spool/sms/incoming/smsd_script.DCmVZZ /opt/tmp/smsd_data.c9Ywfj
Feb 13 16:54:30 smsd: MAINPROCESS: Done: startup_check (shell), execution time 0 sec., status: 0 (0)
Feb 13 16:54:30 smsd: MAINPROCESS: There was 2 major problems found.
Feb 13 16:54:30 smsd: MAINPROCESS: Smsd mainprocess terminated.
Interface: serial / USB / some adapter...
Please help me to attach my modem (Huawey E1550 ) to the SMSd
I don't need provider sorting, neither I have many modems,
here is some commands I have from router shell
/opt/home/admin # lsusb
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0001
Bus 001 Device 002: ID 12d1:1001 ---> here is Huawey router i suppose
Bus 001 Device 003: ID 8564:1000
/opt/home/admin # ls /dev/tty*
/dev/tty /dev/ttyS0
(GSM modem not enabled in the router admin panel) Should I enable it? But I I enable it it tryes to swith me on the 3G modem internet, disconnecting my wired inet
Thanks for any help. Any links are welcomed (I will carefully investigate them)